Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual do Utilizador descarregar pdf (Página 4)

USB/Midi-to-CV/Gate A-190-4 System A-100 DOEPFER

In- / Outputs:

1. USB port: Input for MIDI data.

Please do not use MIDI IN socket and

USB port in parallel!

2. MIDI IN : Input for MIDI data (DIN socket)

3. MIDI THRU : Output to loopthrough incomming MIDI

data to another MIDI device connected

here.

4. Clock : MIDI clock signal output (original or

divided rate).

5. Reset : Reset signal output:

MIDI-Start or Continue: low/no voltage

MIDI-Stop: high voltage.

6. Gate : GATE signal output; will usually be

connected internally to the A-100 system

bus (INT.GATE line) but may be

disconnected.

7. CV 1 : Output for control voltage 1 (D/A

converter 1); usually connected internally

to the A-100 system bus (INT. CV line)

but may be disconnected if desired. May

be used mainly for controlling VCO pitch.

8. CV 2 : Output for control voltage 2 (D/A

converter 2). May be used to control

additional parameters just like e.g. VCF

cutoff or VCA level.

Module width:

6 HP

Module depht : 30 mm

Current

consumption: 200 mA

1 2 3 4 5 6 7 8 9 ... 21 22

Sem comentários

Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual do Utilizador Página 4