Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual do Utilizador descarregar pdf (Página 15)

DOEPFER System A-100 USB/Midi-to-CV/Gate A-190-4

4.3.5 STORE Function Sto

Save your settings permanently with the Store function:

The A-190-4 is equipped with a non-volatile memory

(EEPROM - electrically eraseable programmable read-

only memory) which will save your setup when powering

down the A-100 system. As soon as you power up the

system again, the A-190-4 will recall immediately its

saved settings.

If you change the settings of various parameters, the

A-190-4 stores these changes only temporarily, and they

will be lost when you switch off the A-100 system. To

save any changes in the set-up permanently, you have to

save the set-up by using the simple to use Store function:

This si how to save the settings of the A-190-4:

As soon as your settings are complete and you wish to

save them, please navigate to the Store function with the

”>/+“ and ”</–” buttons.

• Hit ”

 ”. The display shows no The ”>/+“ button

flashes.

• Hit “

 “ again or ” 2 “ to cancel the Store function.

• Hit ”>/+“ to save the current settings permanently.

To confirm the store function, the display shows YES

for a short moment.

If desired, you may set back the A-190-4 to it’s

factory/default settings anytime (please see 4.3.6.

Initialise function).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Sem comentários

Doepfer A-190-4 MIDI/USB-CV/Gate/Sync Interface Manual do Utilizador Página 15