Doepfer A-129-3/4 Vocoder Slew-Limiter/Attenuator/Offset a Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Áudio Doepfer A-129-3/4 Vocoder Slew-Limiter/Attenuator/Offset a. Doepfer A-129-3/4 Vocoder Slew-Limiter/Attenuator/Offset and Controller User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 10
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
doepfer
System A - 100
Modular Vocoder
A-129 /3/4
1
1. Introduction
The A-129 /x series of modules is a modular voco-
der. The crucial components are the A-129 /1
(analysis section) and A-129 /2 (synthesis section).
Module A-129 /3 adds a Slew Limiter to the vocoder.
It includes 5-way Attenuators, 5-way Offset Genera-
tors
, and a
Slew Limiter
(which works on all the
voltages at the five CV inputs simultaneously).
Using the A-129 /3 just on its own, two functions are
available:
Attenuator: whatever signal is patched into the
CV input can be attenuated by your chosen amount
before being sent to the CV output. The attenuation
is set with a control knob.
Offset Generator: whatever signal is patched into
the CV input will have an offset voltage added to it
before being sent to the output. The offset is
variable with a control knob.
To use the Slew Limiter section of the 129 /3, you need
to have module
A-129 /4
(
Slew Limiter Controller
) as
well. It has several dedicated functions, and gives you
control over the following slew limiter functions:
Manual control of the slew rate
CV control of the slew rate, with an input attenuator
Choice of three functions: "Follow", "Slew" and
"Freeze"
“Freezing” the output voltages for the duration of a
gate
H This set of functions is operated by the Slew
Limiter Controller, A-129 /4.
Usually, the slew limiter is patched between the CV
outputs of the analysis section and the CV inputs of
the synthesis section (see chapter 5, User examples).
You can also use module A-129 /3, particularly in
combination with A-129 /4, for other purposes. For
example, using the A-129 /2 synthesis section, you
can make a filterbank.
Vista de página 0
1 2 3 4 5 6 7 8 9 10

Resumo do Conteúdo

Página 1 - 1. Introduction

doepferSystem A - 100Modular Vocoder A-129 /3/411. IntroductionThe A-129 /x series of modules is a modular voco-der. The crucial components are th

Página 2 - A-129 /4

A-129 /3/4 Modular VocoderSystem A - 100doepfer10

Página 3

A-129 /3/4 Modular VocoderSystem A - 100doepfer22. A-129 /3, /4 - OverviewA-129 /3 Vocoder Slew-LimiterCV In 1➀➁01001001001001001001001001001

Página 4 - 3. Controls and indicators

doepferSystem A - 100Modular Vocoder A-129 /3/43A-129 /3In- / Outputs:! CV In 1 ... CV In 5 : CV inputs" CV Out 1 ... CV Out 5 : CV outputs§

Página 5

A-129 /3/4 Modular VocoderSystem A - 100doepfer43. Controls and indicators1 AttenuatorUse Attenuator 1 to lower the signal at the corre-sponding

Página 6 - 4. In- / Outputs

doepferSystem A - 100Modular Vocoder A-129 /3/45Fig. 2: Slew rate explanatory diagram(Attenuator=10, Offset=0)With the control set at 0, the output

Página 7 - 5. User examples

A-129 /3/4 Modular VocoderSystem A - 100doepfer64. In- / Outputs! CV In 1 ... CV In 5Sockets ! are CV inputs. This is where you patch inthe volta

Página 8

doepferSystem A - 100Modular Vocoder A-129 /3/47% Slew CVInput % is where the CV should be patched in tocontrol the slew rate. The amplitude of the

Página 9

A-129 /3/4 Modular VocoderSystem A - 100doepfer8Further adventures in vocoder controlUsing the layout in Fig. 4 (and also not forgettingthe tips and

Página 10 - A-129 /3/4

doepferSystem A - 100Modular Vocoder A-129 /3/49P Because as a modular vocoder the A-129 istotally open-ended, it would be wrong to beprescriptive a

Comentários a estes Manuais

Sem comentários