DOEPFER
MIDI/ANALOG CONTROL KEYBOARDS INTERFACE
MCV4
MCV4 is a low-cost interface to control vintage
monophonic synthesizers via MIDI:
4 analog control voltages CV1...CV4, voltage
range 0...+5V, 8 bit resolution
CV1 = pitch control (VCO), 1V/octave,
controlled by MIDI note on/off and pitch bend
(
CV2...4 = voltage control of other functions
(e.g. VCF frequency, volume) controlled by
monophic after touch (CV2), velocity/volume
(CV3) and selectable MIDI controller (CV4)
3 gate output types selectable via jumper
inside the device: voltage trigger (+5V or power
supply voltage) or S-trigger
MIDI channel and reference note for CV1 = 0V
adjustable via learn button
Different assign modes for CV1 (highest note,
last note, reference note)
Retrigger on/off while playing legato
Gate/trigger polarity normal/inverse
Two 1/4" stereo jack sockets for CV1/2 and
CV3/4 (
1/4" mono jack socket for gate/trigger
Learn button with LED for adjusting MIDI
channel, reference note for CV1, controller for
CV4 and other parameters
Optical display of gate/trigger via LED
MIDI-In, MIDI-Thru
Non-volatile memory for parameter settings
Metal case, approx. 95x75x35 mm
External power supply 9...12V/100mA
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
1/4 semitone resolution)
cable 1/4" stereo -> 2x1/4" mono
required, not included, pls. order in addition)
Adapter for 230V AC with Europlug mains
connector is available, adapters for other
voltages or other mains connector types have
to be purchased by the customer in his country
MIDI to CV/Gate Interface
MIDI to Sync/Clock Interface
MSY2 is an interface to control vintage drum
computers or sequencers that use the SYNC
standard (e.g. Roland TR808 rhythm composer,
TB303 bass line).
Sync Clock is a periodic signal
(0/+5V) representing the tempo. Sync Start/Stop
is a signal that indicates one of the 2 possible
states: Start = +5V, Stop = 0V.
Metal case, approx. 65x60x40 mm
External power supply 9...12V/100mA
Adapter for 230V AC with Europlug connector
is available, adapters for other voltages or
mains connector types have to be purchased
by the customer in his country
if the MIDI
controlling device corresponds 100% with the
MIDI hardware standard.
The factory setting is for external power
supply as the external power supply version
will work in any case.
q
q
q
q
q
q
q
r
r
r
MSY2 converts the MIDI
realtime events Clock, Start and Stop into the
corresponding signals Clock and Start/Stop of the
Sync standard.
2 SYNC DIN sockets (switched in parallel)
Clock miniature jack socket 3.5mm e.g. to
control the arpeggiator of a synthesizer
LED display of Clock and Start/Stop
MIDI-In, MIDI-Thru
Clock conversation rate between MIDI clock
and Sync clock adjustable via DIP switch in the
range of 1...16 (clock dividing factor)
Start/Stop polarity and Clock polarity adjustable
via DIP switches (for applications not following
the SYNC standard)
Power supply via MIDI In is possible
A jumper inside the
MSY2 is used to select the type of power
supply.
You may try out with your
MIDI device if the power supply via MIDI will
work.
MSY2
Doepfer Musikelektronik GmbH
Geigerstr. 13 82166 Graefelfing/Germany
sales@doepfer.de
www.doepfer.com
phone 49-89-89809510
fax 49-89-89809511
(4 páginas)
(32 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais