Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual do Utilizador descarregar pdf (Página 19)

doepfer

System A - 100

MIDI-CV/SYNC interface A-190

CONTROLLER #68 (Legato)

The retrigger function (see CONFIG menu 1) can

also be switched on and off by this controller. Changes

made using this controller are only temporary: they are

not stored during the ‘save’ procedure, and on power-

up, the A-100 will revert to the default factory setting.

CONTROL ch 68 n

n : 0 to 63 Retrigger Off

64 to 127 Retrigger On

CONTROLLER #92 (Tremolo)

This controller can affect LFO frequency (see PER-

FORMANCE menu 2). Changes made using this con-

troller are only temporary: they are not stored during

the ‘save’ procedure, and on power-up, the A-100 will

revert to the default factory setting.

CONTROL ch 92 n

n : 0 to 127 LFO frequency

CONTROLLER #121 (All Controllers Off)

If this MIDI message is sent to the A-190, LFO

amount will be set to 0 (although the LFO keeps

running at the same frequency) and

portamento

switched off.

CONTROL ch 121 n

n : 1 to 127

CONTROLLER #123 (All Notes Off)

If this MIDI message is sent to the A-190, the

gate

turned off, and all notes still in the A-190’s memory

are cleared. Control voltages remain at the level at

which they were last set.

CONTROL ch 123 n

n : 1 to 127

1 2 ... 14 15 16 17 18 19 20 21 22

Sem comentários

Doepfer A-190-1 MIDI-CV/Gate/Sync Interface Manual do Utilizador Página 19